Project proof

Custom Gear Reconstruction For Machinery

Requirements Project Requirements were to reproduce the part that required correct geometry in order to reproduce a usable gear.

Output required Output Required .STEP

Tools used Geomagic Design X pro - Solidworks 2026

Scan image CAD image Deviation proof 3D viewer

Custom Gear Reconstruction For Machinery scan data

Custom Gear Reconstruction For Machinery CAD reconstruction

Scan CAD

Scan data → CAD reconstruction

The left side is the captured scan/mesh reference. The right side is the reconstructed CAD result.

01 Scan02 CAD

Inspection evidence

03 Deviation proof

Deviation image and tolerance notes are shown separately from the slider for clearer proof.

LowIn toleranceHigh

Project details

Scanner: Shining 3D Einscan Rigil
Tools used: Geomagic Design X pro - Solidworks 2026
Requirements: Project Requirements were to reproduce the part that required correct geometry in order to reproduce a usable gear.
Output required: Output Required .STEP

Customer Needed a An accurate Step file built to reproduce; for a machine that no longer has replaceable parts and is integral to the factory operation.

The gear had been warn down by time and usage, so sharp and accurate geometry was needed!